EN 854 1TE
| Availability: | |
|---|---|
| Quantity: | |
Our EN 854 1TE hydraulic hose is a reliable, cost-effective fluid conveyance solution designed for medium and low-pressure hydraulic systems, delivering balanced performance, exceptional flexibility, and easy installation for facility maintenance professionals and industrial equipment operators. This hose features a high-quality oil and water-resistant synthetic rubber inner tube, a single layer of high-tensile 1 ply textile braid hydraulic hose reinforcement, and a durable weather and abrasion-resistant synthetic rubber outer cover. Fully compatible with hydraulic fluids meeting ISO 6743-4 standards (excluding HRD R, HFD S, and HFDT), it operates reliably across a wide temperature range of -40°C to +100°C, making it the go-to choice for general industrial hydraulic applications where lightweight maneuverability and consistent, budget-friendly performance are top priorities.
Fiber weaving | Steel wire winding | Wire braiding machine |
Friction testing machine | High-speed joint venture | Storehouse |
Engineered for medium-pressure hydraulic environments, our medium pressure textile reinforced hydraulic hose uses a single high-tensile textile braid reinforcement layer to deliver dependable strength with maximum flexibility. With a maximum working pressure of up to 2.5 MPa (363 PSI) for smaller diameters, it maintains a strict 4:1 burst pressure safety ratio and 2x working pressure for proof testing, ensuring safe, consistent operation in low-to-medium pressure circuits without the added bulk and cost of multi-layer or steel wire-reinforced alternatives.
The hose’s inner tube is specially formulated to resist degradation from petroleum-based hydraulic fluids and water-based media, while the outer cover provides reliable protection against oil splashes, UV exposure, weathering, and minor physical abrasion in standard industrial environments. This optimized material pairing delivers a long service life in general-duty applications, making our economical industrial hydraulic hose a smart choice for high-volume procurement and routine maintenance, reducing overall operational costs without compromising on quality or compliance.
A key advantage of our EN 854 1TE hydraulic hose is its ultra-lightweight construction and superior flexibility, with weights starting at just 0.09 kg/m for the smallest diameter and generous minimum bend radii starting at 35mm. This design enables hassle-free routing in complex hydraulic systems, tight equipment enclosures, and hard-to-reach areas, drastically cutting down on installation time and maintenance labor. Its resistance to kinking during routing makes it ideal for frequent replacement and retrofit projects in industrial facilities.
Our 1 ply textile braid hydraulic hose is optimized for a wide range of general industrial and mobile applications, including:
The primary use case for this hose is hydraulic return lines, drain lines, and low-pressure control circuits, where its flexibility and flow capacity support smooth fluid transfer in systems with moderate pressure requirements.
Perfect for use in machine tool auxiliary systems, lubrication lines, material handling equipment, factory automation systems, and general plant maintenance, where reliable, low-cost fluid conveyance is essential.
Ideal for small construction machinery, landscaping equipment, agricultural utility vehicles, and other light mobile units, where its lightweight design and flexibility support dynamic operation in variable outdoor conditions.
size | Standaid | I.D | O.D | max W.P | P.P | min B.P | min B.R | W.T | ||||||||
Dash | mm | inch | Min | Max | Mpa | Psi | MPa | Psi | MPa | Psi | MPa | Psi | inch | mm | kg/m | |
0501TE | -3 | 5 | 3/16 | 4.9 | 5.2 | 10.6 | 11.6 | 2.5 | 363 | 5 | 725 | 10 | 1450 | 1.38 | 35 | 0.09 |
0601TE | -4 | 6 | 1/4 | 6.5 | 6.9 | 11.9 | 12.9 | 2.5 | 363 | 5 | 725 | 10 | 1450 | 1.77 | 45 | 0.11 |
0801TE | -5 | 8 | 5/16 | 8 | 8.4 | 13.4 | 14.4 | 2 | 290 | 4 | 580 | 8 | 1160 | 2.56 | 65 | 0.13 |
1001TE | -6 | 10 | 3/8 | 9.5 | 10 | 15 | 16 | 2 | 290 | 4 | 580 | 8 | 1160 | 2.95 | 75 | 0.15 |
1301TE | -8 | 12 | 1/2 | 12.5 | 13 | 18.5 | 19.5 | 1.6 | 232 | 3.2 | 464 | 6.4 | 928 | 3.54 | 90 | 0.19 |
1601TE | -10 | 16 | 5/8 | 15.8 | 16.5 | 22.4 | 23.6 | 1.6 | 232 | 3.2 | 464 | 6.4 | 928 | 4.53 | 90 | 0.28 |
FAQ
Q1:What advantages does the textile braid reinforcement offer compared to steel wire options?
A1:
The EN 854 1TE hose uses one high-tensile textile braid (fiber-based) for reinforcement instead of steel wire, resulting in a lighter, more flexible hose that is easier to handle and route. This design is ideal for medium-pressure hydraulic systems using petroleum-based fluids, providing sufficient strength (up to 40 bar WP for smaller sizes) while reducing overall weight and improving maneuverability in applications such as return lines, general industrial equipment, or mobile machinery.
Q2:What working pressures and safety factors are provided across the hose sizes?
A2:
Working pressure (WP) is size-dependent for medium-pressure suitability:
Smaller sizes (3/16"–1/2"): 40–25 bar (580–362 PSI)
Larger sizes (1"–2"): 16–10 bar (232–145 PSI) Burst pressure maintains a 4:1 safety ratio (e.g., 160 bar burst for 3/16", 40 bar for 2"), and proof pressure is 2× WP. These ratings ensure safe, reliable performance for petroleum hydraulic oil in systems where moderate pressure and good flexibility are required.
Q3:How does the hose perform in terms of temperature and fluid compatibility?
A3:
The hose operates reliably from -40°C to +100°C, suitable for a wide range of ambient and fluid temperatures in industrial settings. The oil-resistant synthetic rubber inner tube is fully compatible with petroleum-based hydraulic fluids, while the outer cover resists oil, abrasion, and weather—making it durable for both indoor and outdoor medium-pressure hydraulic applications like return lines or auxiliary circuits.
Q4:What makes this EN 854 1TE hose a good choice for return line applications?
A4:
With its textile braid reinforcement, low weight (0.12–1.50 kg/m depending on size), and generous minimum bend radii (50 mm for 3/16" up to 630 mm for 2"), the hose offers excellent flexibility and ease of installation in return lines where pressure is lower and flow volume is higher. The design minimizes kinking and supports smooth fluid return in medium-pressure hydraulic systems, while meeting EN 854 1TE and multiple international standards for dependable performance.